I.T.I : Mechanist Trade

Steel rule 30 cm graduated both in English & Metric units

Inside spring caliper 150 mm

Hermaphrodite caliper 150 mm

Divider spring 150 mm

Centre Punch 100 mm

Hammer B.P. 0.5 kg.

Cold chisel flat 25 x 200 mm

File flat bastard 300 mm

File flat 2nd cut 250 mm

File flat smooth 200 mm

Engineers screw driver

Combination Plier 150 mm

Safety glasses

Surface plate 400 mm x 400mm grade

Table for surface plate 900 x 900 x 1200 mm

Marking off table 1200 x 1200 x 900 mm high

Scribing block universal 300 mm

V- Block 100/7 – 80 – A

Try square 300 mm

Outside spring caliper 200 mm

Divider spring 200 mm

Inside spring caliper 200 mm

Straight edge steel 1 meter

Straight edge steel 500 mm

Steel tape 2 meter in case

Steel rule 60 cm graduated both in English & Metric units

Sprit level 2V 250, 05 meter

Hammer B.P. 800 gms. With handle

Screw driver, heavy duty 300 mm with handle

Hammer lead 1 kg.

Spindle blade screw driver 100 mm

Allen Hexagonal keys 2.5 to 12

Spanner D.E. series 2 (set of 7 pieces)

Adjustable spanner 300 mm

Reduction sleeve Morse 1-1, 3-1, 4-1, 4-2, 5-1, 5-2, 6-1,

Angle plate size 200 x 100 x 200 mm

Angle plate adjustable 250 x 150 x 175 mm

Solid parallels in pairs (different sizes) in Metric 12 pairs (assorted) Oil Can pressure feed 500 mg.

Oil stone 150 x 50 x 25 mm

Number drills H.S.S. (parallel shank)

Twist drills 3 mm to 13 mm in st. of 0.5 mm (parallel shank)

Drill Chuck 0.20 with taper shank

Centre drill A 1 to 5

Grinding wheel dresser (diamond)

Grinding wheel dresser huntington type

Clamps C 100 mm

Clamps C 200 mm

Tap and Die set in box metric pitch (6 mm to 12 mm)

Drill H.S.S. taper shank (6 mm to 12 mm in st. of 0.5 mm)

File flat 2nd cut 250 mm

File flat smooth 200 mm

File Half round 2nd cut 250 mm

File triangular smooth 200 mm

Needle file set

File square 2nd cut 250 mm

Reamer 6 mm to 25 mm by 1 mm

Reamer adjustable 10 mm to 15 mm by 75 mm

Tool bits H.S.S. 6 mm square

Tool bits H.S.S. 10 mm square

Tool bits holder (Armstrong) L.H

Tool bits holder (Armstrong) R.H.

Assorted tools and bit holders for lathe, shaper, slotter & planner in different shapes and sizes

Hacksaw frame adjustable 250-300 mm with blades

Table chuck 75 mm jaw swivel base

Machine vice 200 mm swivel base

Machine vice 160 mm swivel base

Hand vice 50 mm jaw

Radius turning attachment

Angle turning attachment

Compound angle vice (standard sine)

Universal vice 150 mm

Universal table angle plate

Shaper tool holder turret type

Base chuck for slotter

shaper indexing center

Knurling tools (set of 3) straight and diamond

Plier cutting 200 mm

Carbide tipped tools of different sizes and shapes (throw away tips)

Hand hammer 1 kg. With handle

Cylindrical cutter 63 x 90 bore dia

Cylindrical cutter 80 x 90 bore dia.

Side and face cutter dia 80 x 8

Side and face cutter dia 160 x 10

Side and face cutter dia 100 x 12

Side and face cutter dia 160 x 16

Side and face cutter dia 200 x 20

Side and face cutter dia 100 x 10

Equal angle cutter 450/100

Equal angle cutter 600/100

Equal angle cutter 900/100

Double angle unequal cutter 50 x 12 x 550

Double angle unequal cutter 50 x 12 x 600

Double angle unequal cutter 50 x 12 x 700

Double angle unequal cutter 50 x 12 x 750

Single angle cutter 63 x 18 x 450 RH

Single angle cutter 63 x 18 x 450 LH

Single angle cutter 63 x 18 x 600 RH

Single angle cutter 63 x 18 x 600 LH

Slitting Saw cutter Ø 75 x 3 X Ø 27 mm

Slitting Saw cutter Ø 100 x 6 X Ø 27 mm

Shell End Mill Ø 50 x 36 x Ø 22 (preferably inserted tip type)

Shell End Mill Ø 75 mm x 50 x Ø 22 (preferably inserted tip type)

Parallel shank end mills Ø6, Ø10 and Ø 16 are (double fluted), Ø 20 mm & Ø 25mm (four fluted)

‘T’ slot cutter with parallel shank- Ø 17.5 x 8 mm width x dia. of shank 8 mm

Concave Milling cutter Ø 63 x 6 radius x Ø 27 mm

Convex Milling cutter Ø 63 x 6 radius x Ø 27 mm

Disc type form milling cutter (involutes form -2 module, 20° pressure angle)

Micrometer outside 0-25 mm

Micrometer outside 25-50 mm

Micrometer outside 50-75 mm

Micrometer depth gauge 0-200 mm

Digital micrometer 0-25 mm

Direct reading vernier caliper 0- 300 (direct reading with dial)

Digital vernier caliper 0- 300 mm

Vernier height gauge 250 mm

Vernier gear tooth caliper

Combination set with 300 mm rule 2 sets

Vernier bevel protractor with 150 m blade

Bevel gauge 200 mm

Telescopic gauge 13 mm to 300 mm

Sine Bar 200 mm

Dial test indicator with magnetic gauge type 1 grade A with magnetic base

Center gauge 600

Slip gauge set (normal set) metric (for the whole institute)

Screw pitch for metric pitches (25-6 mm)

Radius gauge metric set (1-6 mm)

Limit plug gauges 5 mm to 25 mm by 2.5 mm

Ring gauges 5 mm to 25 m by 2.5 mm (GO & NO GO)

Taper gauge M.T. No. 1, 2, 3, 4 & 5

Feeler gauge

Planer gauge standard size

Magnifying glass 75 mm

Steel lockers for 12 trainees

Steel chair for Instructor

Steel table for Instructor

Work bench for Fitters with 2 vices of 100 mm jaw

Steel cup board 180 x 90 x 45 mm

Steel cup board 120 x 60 x 45 cm

Black board with easel

First Aid Box

Shaping machine 450 mm stroke (motorized) with all attachments

Shaping machine 315 mm stroke (hydraulic) with all attachments

Double column planer 1500 x 1000 x 1000 (motorized) with all attachments

Slotter 180 mm stroke (motorized) with all attachments

Lathe general purposes all geared height of centers 150 mm to

below Between centers 150 mm supplied with jaw and 4 jaw

chuck, face plate, Taper turning attachment, steadies etc. and set

of lathe tools

Tool and cutter grinder 250 mm to admit 450 m between centerfully

motorized work head supplied with tool rest of different

types table clamps and other attachments.

Drilling machine pillar 20 mm capacity

Radial drill 1200 mm area motorized with tapping attachment

Silicon carbide grinder for carbide tipped tools

Double ended Pedestal Grinder with 178 mm wheels(one fine

and one rough wheel)

Milling machine universal horizontal Table Length x width

1350 x 310 mm (motorized) with all attachments such as .

a. Universal head

b. Vertical head

c. Slotting attachment

d. Rack cutting attachment

e. Rotary table

f. Dividing head

g. Adaptors, arbors and collects etc. for straight shank and

mill from 3 mm to 30 mm

Milling machine plain type horizontal Table Length x width

1350 x 310 mm (motorized) with all attachments

Milling machine vertical Table Length x width

1350 x 310 mm (motorized) with all attachments

Surface grinding machine wheel dia. 180 mm (or near)reciprocating table, longitudinal table traverse 200 mm (or near) fitted with adjustable traverse stop. Full motorized supplied with magnetic chuck 250 mm x 120 mm diamond tool holder set of spanner, grease gun etc.

Cylindrical grinder Max. grinding length 300 mm, Height of centre 130 mm, Max. distance between centers 340 mm

CNC milling trainer with all accessories and consumables in duplicate